Carcass of livestock complexes
The composition was applied in two layers with a total thickness of 80 microns.
8 (800) 222-37-63
Горячая линия по вопросам Цинкирования
The composition was applied in two layers with a total thickness of 80 microns.
The composition was applied as a primer in two layers with a total thickness of 80 microns, after which a two-component polyurethane finish coating was applied in one layer.
The total thickness of the self-coating was 80-100 microns.
Restoration of the old zinc coating by applying the composition of the Zinker class in 2 layers followed by the application of the decorative composition ALINOL.
The composition is applied in 2 layers, 80 microns thick, airless. The metal is cleaned mechanically.
Application of GALVANOL in 2 layers and ALINOL in 1 layer.
Applying the composition of the Zinker class in 2 layers with a total thickness of 80 microns.
The composition of GALVANOL was used as a primer for decorative finishing coating to prevent under-film corrosion.
Surface preparation was performed by mechanical Stripping followed by degreasing. The composition of GALVANOL was applied with a brush and spray gun.
Application of a zinc coating in 2 layers with a total thickness of 80 microns.
Preparation for painting was made by degreasing the metal surface. The composition was applied with a brush in 2 layers with a thickness of 80-90 microns. With intermediate drying of layers for 20-30 minutes.
The structure was mechanically cleaned with subsequent degreasing of the surface, then zinc-coated with the composition of GALVANOL using a brush.
Оставьте заявку на обратный звонок, и наш специалист свяжется с вами в течение часа