Fan grilles
Application of a coating with a total thickness of at least 80 microns.
Примеры Цинкирования
Tower for mounting of chimneys
Applying a zinc coating in 2 layers.
Cooler
Application of GALVANOL with a total thickness of at least 80 microns to the prepared surface, followed by application of 40 microns of ALINOL.
Attachment points, traverse of power line supports
ALINOL was used as a decorative coating. The total thickness of the protective coatings was about 100 microns.
Pipeline systems (emergency tank protection)
The protective coating was applied in several layers, with a total thickness of at least 100 microns, on mechanically prepared and degreased metal. The application process was carried out with a spray gun and brush. Also, during the installation of the system, THE galvanol composition protected the welds.
Heat stabilizer
Application of the zinc coating composition in 2 layers with a total thickness of at least 80 microns.
Load-bearing farms of water treatment equipment
Preparation of metal for painting were produced by mechanical means (kvartsevanie), followed by degreasing. The composition of GALVANOL was applied to the prepared surface using a spray gun and rollers in 2 layers.
A dredger (GDR)
Restoration of the lost coating on the ship’s hull was performed by applying the composition with a brush and spray gun.
The Volga hydroelectric power station
Application of the composition by air in 2 layers.
Cell towers
The composition of GALVANOL was applied with an airless spray gun on a cleaned and degreased surface.
Support pipes for TV and radio communications
The zinc composition is applied by airless spraying on the surface prepared by mechanical means, with degreasing, in 2 layers.
Fixed post for satellite dish
Preparation of metal by mechanical means, applying the composition by air spray in 2 layers.
Остались вопросы?
Оставьте заявку на обратный звонок, и наш специалист свяжется с вами в течение часа